Blog |
-
- >
- >>
|
|
18 Sep 2025 18:17
|
If you already have manual gates in place, you might be wondering whether you can upgrade them rather than start from scratch. In many cases, you can. Retrofitting electric gate kits is often possible, but there are a few key checks to make before you begin.
This guide explains how to automate existing gates, what to look out for, and where it may be more practical to replace rather than convert.
Can Manual Gates Be Automated?
Yes, most manual swing or sliding gates can be automated using a retrofit gate kit. The process involves fitting motors to the existing structure, along with control units, safety features, and power connections. But success depends on the gate’s condition, weight, material, and how it was originally installed.
Some gates are already designed with automation in mind. Others might need adjustments before they can support motorised systems safely and reliably.
What to Check Before Installing a Retrofit Kit
1. Hinge and Post Strength
Electric gate motors add force and movement to the gate structure. Posts must be solid and well anchored. Wobbly posts or weak hinges may not support the added pressure. If in doubt, have the fixings checked or upgraded.
2. Gate Condition
The gate should open and close freely by hand. If it sticks, scrapes the ground, or feels unbalanced, those issues will get worse under automation. Lightweight gates in poor condition may also bend under pressure from the motor.
3. Material Suitability
Timber gates can warp or flex, which may affect motor performance. Metal gates are usually more rigid and better suited to automation. If your timber gates are in good shape, they can still be used, but all mounting points need to be strong and secure.
4. Available Space
Motors, brackets, and control boxes take up space. For swing gates, make sure there is enough clearance around the gate and on the gate leaf for motor arms to mount properly. For sliding gates, the gate needs enough room to slide fully open without obstruction.
5. Power Supply
Electric gates need a safe and reliable power source. You’ll need access to mains power, or in some cases, a solar setup. For most retrofits, power needs to be run from the house or nearby building, usually through protective trunking.
Limitations to Be Aware Of
● Poor Drainage: For underground kits, water buildup can damage the motors. Drainage may need to be installed if it doesn’t already exist.
● Heavy Gates: Some gates may be too heavy for standard kits. In these cases, a stronger motor or a replacement gate might be more practical.
● DIY Restrictions: While many retrofit kits are DIY-friendly, some installations are better left to professionals, especially when adjustments or reinforcements are needed.
Swing vs Sliding for Retrofits
Both types of gates can be automated, but sliding gates are often easier to retrofit if the track is already in place and the gate slides freely. Swing gates need more careful assessment of post strength and arm placement.
If your entrance already has a clear area for the gate to slide across, sliding kits offer a straightforward upgrade path. For swing gates, you'll need to check for enough space around the posts for the motor arms to move without hitting walls or obstructions.
Benefits of Retrofitting an Existing Gate
● Lower cost than full replacement
● Keeps the look and feel of your original gate
● Less disruption during installation
● Can be completed fairly quickly with the right kit
When a Replacement Might Be Better
Sometimes, the existing gate simply isn't suitable. This can be due to:
● Weak or rotting materials
● Warped shape or poor balance
● Incompatible hinge layout
● Space limitations for motor placement
In these cases, replacing the gate while installing the automation system ensures a longer-lasting and more reliable result.
Contact GatesGates.co.uk for Assistance
You can automate many existing gates with the right kit and a few key checks. If the gate is in good condition, opens smoothly, and is fixed to solid posts, then retrofitting an electric system is a smart upgrade. Just be sure to check the gate’s structure, spacing, and power access before you start.
If you're not sure whether your gates are suitable for automation, contact us and we’ll be happy to advise. We stock a wide range of retrofit gate kits for both swing and sliding systems, with options for most property types and gate materials.
|
|
Permalink
|
| 0 Comments
|
|
|
17 Sep 2025 12:40
|
Whilst manual gates have long been a staple for securing properties, they can often feel outdated and inconvenient. From struggling with heavy gates in bad weather to worrying about unauthorised access, relying solely on manual operation can create frustration and reduce the overall efficiency of a property’s access system.
Modern gate automation options, deliver a seamless, secure, and stylish solution that blends convenience with advanced technology. By upgrading with an automated gate system, property owners can enhance both security and lifestyle, gaining a system that operates smoothly with minimal effort. From touch-of-a-button access to integration with smart home features, automated gates provide a practical upgrade combining peace of mind and smart technology.
Manual gates can often cause more problems than they solve, especially for busy homes or businesses. Many property owners experience repeated issues, such as inconvenience, security concerns, and maintenance challenges. These problems can slow down daily routines and reduce the overall efficiency of property access. The following signs show when it might be time to consider upgrading to an automated gate system;
Inconvenience of Manual Operation
If you often leave your car to open or close a gate, it can become a big frustration, especially in bad weather or when carrying shopping, children, or equipment. Manual operation slows daily routines and adds unnecessary effort to simple tasks. Automated gates allow you to open and close them effortlessly using a remote, keypad, or smartphone, saving time and energy while improving the overall convenience of property access.
Security Concerns
Manual gates often lack advanced security features, leaving properties vulnerable to unauthorised access. If you’re worried about potential intruders or want to monitor who enters and exits, automation can provide peace of mind. Integrated access controls, video intercoms, and keypads ensure only authorised users gain entry. Automated gates act as a visible deterrent and provide enhanced protection for families, employees, and assets, making your property significantly safer compared to manual alternatives.
Frequent Wear and Tear
Heavy manual gates can suffer from repeated strain due to constant opening and closing, leading to mechanical damage, sagging, or misalignment. This can result in costly repairs and compromise long-term durability. Automation reduces physical strain on the gate structure, minimising maintenance requirements and extending the lifespan of your investment. Electric gate systems provide smooth, controlled movement that preserves the gate’s integrity while maintaining reliable operation day after day, reducing repair costs over time.
Outdated Appearance or Lack of Modern Aesthetics
Manual gates may look functional but often fail to enhance the look of a property. If your gates appear old or unrefined, they can detract from the overall impression of your home or business. Automated systems can be customised to match modern property styles, with sleek designs and high-quality finishes. Installing an automated gate not only improves functionality but also improves the exterior appearance, giving your property a modern, refined look that complements its overall aesthetic.
High Traffic or Frequent Usage
Properties with multiple users or heavy traffic can also make manual gates cumbersome and inefficient. High-frequency opening and closing increases wear, causes delays, and disrupts the flow of people and vehicles. Automated gates streamline access for multiple users, ensuring smooth operation regardless of traffic levels. Systems can be programmed for quick operation, reducing queues and improving overall efficiency. For businesses or multi-residential properties, this enhances safety, convenience, and workflow while eliminating the frustrations of repeated manual use.
Benefits of a Gate Automation System
Automating gates is more than a convenience, it’s an investment in security, efficiency, and aesthetics. Electric gate systems transform how to interact with your property, offering seamless control and peace of mind. With a range of options available, from swing and sliding gate kits to integrated access controls like video intercoms and keypads, modern automation ensures a tailored solution for every property. Below we discuss some key benefits of a gate automation system;
Enhanced Security
Automated gates provide controlled access, significantly reducing the risk of unauthorised entry. Integration with video intercoms, keypads, and remote monitoring allows property owners to verify visitors before granting access. The combination of a strong physical barrier and advanced technology acts as a visible deterrent to intruders. This enhanced security protects families, employees, and assets, offering peace of mind and ensuring that your property remains safe at all times.
Improved Convenience
Automation removes the need to manually open or close heavy gates, saving time and physical effort. Remote controls, smartphone apps, and keypads allow entry and exit with minimal disruption, even during adverse weather conditions. For busy homes, multi-user properties, or high-traffic commercial sites, automated gates streamline routines, reduce frustration, and improve efficiency. The effortless operation makes daily access quicker and simpler, enhancing the overall experience for everyone using the property.
Long-Term Durability and Efficiency
Automated gate systems also reduce mechanical strain on gate structures, minimising wear and tear caused by repeated manual use. Smooth, controlled movement preserves hinges, tracks, and other components, extending the lifespan of the gate while lowering maintenance costs. Automation also ensures consistent operation, even with frequent usage, maintaining efficiency for residential or commercial properties. Over time, this reliability translates into fewer repairs, reduced downtime, and a long-lasting, hassle-free access solution.
Welcome to Gates Gates
If you’re considering adding gate automation, why not explore Gates Gates comprehensive range of automation systems. We provide a wide range of high-quality gate automation systems designed to suit every property, from sliding and swing gate kits to advanced access control systems and accessories. We work closely with every client to provide them with tailored automation solutions that improve the efficiency, reliability, and safety of their gates. Visit our website to browse our full range of gate automation systems, and don’t hesitate to contact us should you have any questions or queries.
|
|
Permalink
|
| 0 Comments
|
|
|
17 Sep 2025 11:44
|
Choosing a gate automation system is an important decision that often combines practicality, security, and aesthetics. Whether you are installing gates for a residential driveway or a commercial entrance, selecting the correct system ensures smooth operation, long-term durability, and enhanced convenience. Investing in a high-quality gate kit allows you to tailor your property’s access solution to your specific needs. It is not just about security, the right gate system also improves daily convenience, adds to the visual appeal of your property, and can increase overall value. In this post, we will explore how to choose the right gate kit for your property, including gate types, sizes, and optional automation features.
Understanding Gate Types
The first step in choosing a gate kit is understanding the two main types of gates: sliding and swing. Each type has unique features, advantages, and considerations depending on your property’s layout and access requirements. Making the right choice ensures both functionality and longevity and below, we look at each type in more detail, how it operates, and which situations they are ideally suited for:
Sliding Gates
Sliding gates operate by moving horizontally along a track and are ideal for properties with limited space. They require less clearance than swing gates, making them perfect for driveways that are narrow or have walls, fences, or landscaping nearby. Sliding gates are typically powered by an electric motor, offering smooth, effortless operation. They are also highly secure, as their track system makes it difficult for intruders to force open the gate manually.
Swing Gates
Swing gates open inward or outward on hinges, similar to traditional doors. They are suitable for properties with more space and provide a classic, elegant appearance. Swing gates can be single or double leaf, offering flexibility depending on the width of the entrance. While they require adequate clearance for the gate to swing freely, they are easy to install and maintain, and can be automated to enhance security and convenience.
Single & Double Gates
Another key consideration is whether to choose a single or double gate. Single gates consist of one panel that opens either by sliding or swinging. They are typically easier to install and require fewer components than double gates. They’re ideal for narrower entrances and can still provide excellent security and aesthetic appeal. Single gates are also generally more cost-effective while offering the same automation and access control options as double gates.
Double gates feature two panels that meet in the middle when closed. They are suitable for wider driveways and provide a more dramatic, symmetrical look. Double gates allow larger vehicles to enter and exit more easily and can enhance the property’s visual appeal. Like single gates, they can be fully automated, integrating with keypads, intercoms, or remote controls for improved convenience.
Matching Your Property’s Needs
When choosing a gate kit, it’s important to consider the specific requirements of your property. Factors such as space, traffic frequency, security, and aesthetics can all influence the best choice. Evaluating these elements ensures your gate operates smoothly, looks great, and provides the level of protection needed. Next, we discuss some ways to help match your gate kit to your properties needs;
Space Availability
It is essential to consider the available space. Sliding gates require sufficient horizontal clearance along the driveway, as they move parallel to the fence or wall when opening and closing. In contrast, swing gates need enough room to swing fully without obstruction from vehicles, walls, or landscaping. Carefully assessing the space ensures smooth, reliable operation, prevents accidental damage to the gate or surrounding structures, and helps you choose the most suitable design for your site.
Traffic Frequency
The frequency of use is another crucial factor when choosing a gate kit. Properties with high traffic, such as busy households, commercial entrances, or multi-residential sites, benefit from automated systems that operate quickly and efficiently. Frequent manual use can put extra strain on the gate mechanism, potentially reducing its lifespan and increasing maintenance requirements. Selecting a durable, well-engineered gate designed to handle repeated operation ensures consistent performance, reliability, and peace of mind over the long term.
Security Requirements
Security needs can heavily influence the choice of gate system. Properties containing valuable assets, sensitive areas, or multiple users require reinforced gates with integrated access control systems. Automated gates can be combined with keypads, video intercoms, and remote monitoring, enabling you to control and monitor entry effectively. By providing a strong physical barrier along with technological support, these systems help deter unauthorised access, protect occupants and property, and provide property owners with confidence and reassurance in their security measures.
Aesthetics
The gate's visual appearance should also complement the overall style and character of your property. Modern gates offer a sleek, contemporary look that can enhance a minimalist or up-to-date architectural style, while traditional designs suit classic homes or historic buildings. As well as aesthetics, the choice of materials, finish, and design also contributes to the perception of quality and security. Selecting a gate that is both attractive and functional ensures it enhances the visual appeal while meeting practical requirements.
Discover the Ideal Gate Kit at Gates Gates
At Gates Gates, we offer a wide range of high-quality gate kits designed to make life easier and your property more secure. Our systems include both sliding and swing kits, available in single or double configurations to suit a variety of entrances. We also provide a variety of gate access systems and controls, allowing you to further automate and streamline your gates. If you need help choosing the right solution for your property, our customer support team can provide expert advice and support. Head over to our website today to browse our full range of options and discover how Gates Gates can enhance your property’s security, functionality, and style.
|
|
Permalink
|
| 0 Comments
|
|
|
29 Aug 2025 17:26
|
Living by the sea has many advantages, but the salty air and harsh coastal weather can wear down materials faster than inland conditions. Electric gates are no exception. If you are considering installing an automated gate system by the coast, it is important to choose the right design, materials, and components. Doing so reduces the risk of rust, corrosion, and early breakdowns.
Let’s look at the main factors you need to consider, which materials perform best in coastal environments, and whether underground or surface kits are the right option. It also compares sliding and swing gates in seaside conditions and explains the best installation practices.
Coastal Conditions Create Extra Wear
Homes close to the sea are exposed to unique environmental pressures. High salt levels in the air can speed up rust on metals, corrode circuit boards, and damage exposed fittings. Wind, sand, and heavy rain can also shorten the life of mechanical systems.
Because of these challenges, electric gate kits installed in coastal areas need to be chosen with extra care. The wrong materials or a poor installation may lead to failures within a short period of time.
Key Things to Look for
1. Rust-Resistant Materials Steel gates are strong and durable, but untreated steel will rust quickly when exposed to salt air. To combat this, aluminium and stainless steel are better choices. They resist corrosion and hold up well against damp, salty conditions.
If you do choose steel, look for galvanised finishes or high-quality powder coatings. These provide a protective layer that extends the lifespan of the gate. Stainless steel arms, fixings, and brackets are also worth the investment, as they offer far greater resistance to salt damage.
2. Weatherproof Gate Motors
Gate motors must be suited to outdoor use. In coastal areas, this means choosing systems with proper sealing against moisture and dust.
It is important to understand how IP ratings apply. Many above-ground swing gate motors do not carry high IP ratings because they are designed to sit above ground level, away from standing water. They are often sealed at the top to protect electronics, but the lower sections usually have ventilation and drainage holes. These holes are essential for moisture release but prevent the motor from being fully watertight. Submerging them would allow water to enter, regardless of the IP code.
By contrast, underground motors are the type most commonly supplied with high IP ratings. Because they are fitted at ground level, they are designed with stronger protection against water ingress. However, they only work effectively if the installation has proper drainage. Without this, pooling water can still cause damage.
3. Protected Wiring and Control Boxes The salty air and high humidity of coastal areas put strain on electrical systems. Cables should always be installed inside protective trunking to shield them from moisture and corrosion. Control boxes must be weatherproof and fitted with seals that keep damp air out. Any open joints or exposed wiring will fail much faster by the sea than inland.
4. Regular Maintenance Matters More All electric gates need upkeep, but those at the coast require closer attention. Salt deposits can build up on moving parts and work into seals. Regular rinsing with fresh water helps wash away salt crystals. It is also a good idea to check arms, brackets, and joints often to make sure they move freely and have not started to corrode. Catching early rust spots prevents bigger problems later.
Swing Gates vs Sliding Gates in Coastal Settings
Your choice of gate type has a big impact on how well the system copes with coastal conditions. Both swing and sliding gates can be installed successfully, but they face different challenges.
Swing Gates
Swing gates open on hinges, which means they are more exposed to wind. When strong gusts push against the surface of the gate, they place pressure on the motors, brackets, and fixings. In coastal areas, this stress is increased by the presence of salt, which can weaken metal parts over time.
If you do opt for swing gates at the coast, there are two important considerations:
- Motor placement: Surface-mounted motors are usually easier to access and maintain than underground motors. Underground kits are still possible, but they demand excellent drainage to prevent water ingress.
- Gate design: Privacy is important, but fully infilled swing gates catch the wind like a sail. This increases strain on the automation. For coastal locations, a swing gate with open sections that allow air to pass through is usually a better choice. It reduces wind resistance and helps the system last longer.
Sliding Gates
Sliding gates are often the more practical choice for coastal properties. Because they move sideways along a track, they are less affected by wind pressure than swing gates. They also avoid the need for underground motors in most cases, which reduces the risk of water problems.
The main upkeep task is keeping the track clear of sand, salt, and debris. With occasional cleaning, sliding gates perform well even in exposed coastal areas.
Which Is Better?
For many coastal properties, sliding gates offer better long-term performance, particularly in windy and exposed spots. Swing gates remain an option, but they work best when designed to allow airflow and when fitted with accessible surface motors. The right choice depends on your space, layout, and how much maintenance you are prepared to carry out.
Underground vs Surface Kits
Another decision is whether to use underground automation kits or surface-mounted motors. Both can work at the coast, but each has strengths and weaknesses.
- Underground Kits: Provide a clean look and protect the motor from physical knocks. They also tend to have higher IP ratings because of their location. The main issue is drainage. Without reliable water flow away from the motor boxes, corrosion can set in
- Surface Kits: Easier to access and replace if needed. They do not always have the highest IP ratings, but they are designed to sit above water level. With stainless steel arms and brackets, they can be well suited to coastal use.
The most important factor is not just the type of kit but the quality of the installation. A well-drained underground system can perform reliably, but if drainage is poor, a surface kit may be the safer option.
Best Practices for Coastal Installations
To make sure your gate system lasts as long as possible in a coastal environment, follow these key practices:
- Choose gates made from stainless steel, aluminium, or powder-coated steel.
- Select automation kits with good sealing and drainage.
- Use protective trunking for cables and sealed weatherproof boxes for controls.
- Install underground motors only with excellent drainage, or opt for surface kits.
- use swing gates with airflow to reduce wind load, and use infilled panels for sliding gates.
- Carry out regular rinsing and checks to catch corrosion early.
What to Keep in Mind
Installing electric gates near the sea is entirely possible, and when done correctly, they add real value, security, and convenience to your property. The key is to choose materials and automation designed to withstand salt, moisture, and wind.
Sliding gates are often the best choice for exposed coastal locations, thanks to their resistance to wind and simpler motor setup. Swing gates can still perform well, but only when fitted with airflow-friendly designs and durable above-ground automation.
Maintenance will always matter more by the coast than inland. With regular checks and the right installation, your electric gates will continue to run smoothly and stand up to the elements.
Coastal living places extra demands on electric gates, but the right combination of materials, motors, and design will keep your system working for years. Whether you choose sliding or swing gates, pay close attention to corrosion resistance, drainage, and wind management. If you want tailored advice, speak with an expert supplier who understands coastal installations and can guide you to a system built for the conditions.
|
|
Permalink
|
| 0 Comments
|
|
|
27 Aug 2025 13:59
|
Electric gates are essential for providing secure, controlled access for customers, clients, and delivery drivers, while also keeping your business safe and secure. Electric gate automation kits make using gates more efficient, smarter and safer too, prompting many business owners to install them to save time and simplify access. At Gates Gates, we offer a range of high-quality electric gate automation systems for swing and sliding gates, with options suitable for various types of commercial gates. In this post, we’ll explain why electric gate automation is a worthwhile investment for businesses, the key advantages it can bring and introduce some of our automation kits that can help enhance access control and improve security.
The Value of Electric Gate Automation for Businesses
Electric gate automation offers a wide range of practical benefits for business owners. By automating gates, you can significantly improve access control, security, and day-to-day efficiency. Whether your business sees high volumes of vehicle traffic or needs to maintain strict security, installing an electric gate automation system is a smart and valuable investment that can support both operations and peace of mind. Below we highlight some examples why electric gate automation is worthwhile investment:
Improved Security and Access Control
Electric gate automation enhances site security by allowing businesses to better control who enters and exits the premises. Automated gates can be connected to access systems such as keypads, remotes or fobs, ensuring only authorised personnel can gain entry. This not only helps protect valuable assets but also acts as a visible deterrent to unauthorised visitors or potential intruders.
Convenience and Operational Efficiency
Manual gates can slow down operations, particularly in busy environments. Electric automation allows staff, delivery drivers and clients to enter and exit more quickly and easily, saving time throughout the day. Whether operated via remote control or integrated with other access systems, automated gates reduce the need for manual handling, improving overall efficiency at access points.
Professional Image and Customer Experience
First impressions matter, and a gated entrance is often the first physical point of contact for visitors. An automated gate creates a more professional and welcoming access point. It shows that your business is modern, secure and well-organised. For client-facing premises in particular, this can help build confidence and trust from the very first interaction.
For businesses, time, security and presentation all directly affect day-to-day operations and reputation. Unlike residential properties, commercial premises often see high traffic volumes and require reliable, low-maintenance solutions. Whether it’s protecting stock, managing deliveries or creating a strong brand impression, electric gate automation provides the functionality and performance businesses need to operate safely and professionally.
Electric Gate Automation Options
At Gates Gates, we offer a wide range of automation kits to suit different types of business premises, including both sliding and swing gates. Depending on the layout and the way your gate opens, electric gate systems can be tailored to provide optimal performance. From small-scale setups to more complex commercial entrances, our range includes something to suit all requirements. Below is more information on our range of electric gate automation options;
Sliding Gate Automation Kits
Sliding gate kits are ideal for businesses with limited space behind the gate or where the entrance is on an incline. These systems operate by sliding the gate horizontally along a track, making them ideal for wide entrances and industrial units. They offer smooth operation and strong resistance against forced entry, combining space-saving design with robust security features.
In addition to their space efficiency, sliding gate automation systems are highly reliable and durable, making them well-suited for high-traffic environments. Their streamlined movement and integrated safety sensors make them easy to use and safe for both vehicles and pedestrians. With low maintenance requirements and compatibility with a range of accessories, they are a dependable option for long-term use.
Swing Gate Automation Kits
Swing gate kits are a popular choice for properties with gates that open inward or outward on hinges. These systems are easy to install on existing gate setups and work well for businesses with traditional entrances or ample clearance space. They provide a classic look while incorporating modern automation features for smooth, controlled movement.
Swing gate automation offers quiet, efficient performance and can be tailored for single or double leaf gates. Ideal for offices, retail parks and gated business premises, these kits support a professional appearance without compromising on functionality. Advanced safety features and access options can be integrated easily, offering full control over who enters the site.
Electric Gate Accessories for Businesses
To enhance your electric gate system even further, a range of accessories can be added. Options such as remotes, keypads, exit buttons, safety sensors and magnetic locks can improve both convenience and security. These accessories allow businesses to customise how their gates are used day-to-day, ensuring the system fits their specific operational needs.
We stock a wide range of reliable accessories to complement any automated setup. Popular choices include remotes for easy gate operation, external exit buttons for convenient on-site access, and key switches for secure entry control. We also offer radio receivers for improved remote compatibility and gate locks to reinforce the overall security of a premises.
Explore our wide range of swing and sliding gate systems, with choices available for both single and double leaf gates and our extensive range of accessories, controls and safety features. Visit our website today to explore our electric gate automation options..
|
|
Permalink
|
| 0 Comments
|
|
|
27 Aug 2025 13:04
|
Electric gates are a popular choice for many homeowners, offering a simple, quick, and convenient way to access a property. To enhance the overall experience, many people choose to add extra accessories to their electric gate systems, helping to streamline daily use while improving security and protection. From remotes and external exit buttons to key switches and more, the right accessories can make a noticeable difference.
At Gates Gates, we offer a wide range of high-quality electric gate accessories that can be integrated into your existing system. In this post, we’ll explore why electric gate accessories are a valuable addition, the key benefits they provide, and introduce some different accessory options available to enhance gate systems.
The Benefits of Adding Accessories to Electric Gates
Electric gate accessories are commonly bought to enhance performance, convenience, and security. These add-ons are designed to streamline everyday use and offer greater control, making it easier and safer to operate gates at any time. Whether it’s a remote control, key switch, or an additional lock, each accessory plays a role in improving the overall user experience. Below we discuss some of the reasons why people add accessories to their gates;
- Convenience and Ease of Access - Accessories such as handheld remotes and radio receivers let users operate gates without leaving their vehicle, which is ideal during poor weather or late-night arrivals. This removes the need to walk to a control panel, making entry and exit much quicker and easier, especially valuable for busy households or shared driveways.
- Improved Security and Safety - Gate locks and key switches enhance property security by restricting access to authorised users only. Key switches allow controlled entry from outside, which is useful for staff or deliveries, while integrated locks ensure gates remain secure when closed. These features offer reassurance for families or businesses concerned about safety and unauthorised access.
- Enhanced Control and Flexibility - Exit buttons and radio receivers also add versatility to gate systems. Exit buttons provide quick, hands-free operation from inside the property, while radio receivers increase compatibility with various control devices. These accessories are particularly useful for commercial sites or shared residential access, offering a practical solution for managing multiple users efficiently.
Highlighting Electric Gate Accessories
At Gates Gates, we stock a variety of high-quality electric gate accessories suitable for both single and double leaf gate systems. Our accessories are carefully chosen to complement a range of setups and provide practical solutions for enhancing gate performance.
From improving access control to increasing security, each accessory is designed to deliver reliable, long-lasting benefits. Whether you're upgrading an existing system or installing new gates, gate accessories can help you get the most out of your automation setup. Below are some of the options to consider;
Remotes
Remotes are one of the most commonly added accessories to electric gate systems due to the convenience they offer. With a simple press of a button, users can operate their gates without having to leave their vehicle or home. This is particularly useful during bad weather or when approaching the property in the dark. Remotes also reduce the need for physical contact with gate components, helping maintain hygiene and ease of use across multiple users.
Gate Locks
Gate locks are a key accessory for those seeking to increase the security of automated gate systems. These locks provide an added physical barrier, ensuring that the gate remains firmly closed when not in use and cannot be forced open. They are especially useful in areas where security is a priority or where gates may otherwise be vulnerable to tampering. By combining automation with a physical locking mechanism, homeowners can enjoy greater peace of mind.
External Key Switches
External key switches offer a secure and straightforward method for opening electric gates using a dedicated key. Ideal for visitors, deliveries, or staff, they allow access to the property without the need for a remote. Positioned outside the gate, these switches provide a reliable backup access point in case other systems fail or remotes are lost. Their simplicity and durability make them a trusted solution in both residential and commercial applications.
External Exit Buttons
Exit buttons allow users to open electric gates from inside the property with a simple press. Typically mounted near the gate on the interior side, they are useful for guests, staff, or children needing to exit without a remote or key. This makes them particularly beneficial for busy households or shared access points where multiple people may need to leave at different times. They offer an added layer of ease and ensure efficient gate operation throughout the day.
Radio Receivers
Radio receivers are essential for expanding the functionality of an electric gate system. They enable compatibility with various wireless control devices, including remotes and wireless keypads. By integrating a radio receiver, users can add more remotes or allow for the use of different access devices, increasing the flexibility of the system. This is particularly valuable for properties with multiple users or where enhanced range and responsiveness are required.
Invest in Electric Gate Accessories Today
Enhance the convenience and functionality of your electric gates by upgrading them with smart accessories from Gates Gates. We stock a wide range of high-quality electric gate accessories that you can easily add to existing setups; from remotes and key switches, to exit buttons, gate locks, radio receivers and much more. Head over to our website today to browse our full range of gate accessories available.
|
|
Permalink
|
| 0 Comments
|
|
|
-
- >
- >>
|
|
