The CMO 1500 is a 1.5 metre safety edge that can be cut to size and is certified category 3, this provides a very effective means of cut out in case of emergency, and does not fail in operation if a single micro-switch fails. Also it will stop the gate if the wire breaks or becomes out of calibration.
The CMO was certified on 31/12/2009 Part 2 Validation as a Category 3 Safety Edge,in accordance to the standard and / or technical specifications of EN ISO13849-2. Please refer to DFM Automazioni for further information
Please Note; for a category 3 classification for your installation you must use of the IRFC4 Monitor with 8K2 end of line resistor. Unless your gate control panels has a dedicated 8K2 edge input point that may support the edges directly.