Linear 500 Long Stroke Single Gate Kit

The Linear Single 500 LT Kit is a stylish and modern system,suitable for gates with long leafs such as 5 bar and farm gates. It requires mains power to operate, however it has a built-in transformer that reduces the power to the motors to 24 Volt, this enables the facility for battery back-up if required. The maximum size gate the motor can move is 300 kg in weight and 4.5min length. The system is very easy to program due to its automatic program function. The Linear 500 boasts many innovative features, including a slow-down facility on opening and closing to prevent un-necessary noise, obstacle detection to ensure safety, secondary safety input for additional photo cells or safety edges, partial opening for pedestrian use, and the capacity for up to 200 remote controls. Please be aware that when choosing your automation you will need to take in to consideration wind factor, if your gate is close boarded this can dramatically affect how easily the gate swings on a windy day, so you will have to opt for a kit with a high weight capacity.   

The kit consists of: One Linear motor; Control unit with built-in radio receiver and power supply which comes in an IP 54 rated box; two Stylo 4 radio transmitters; one pair of Viky 30 photo beams; a set of mounting brackets and fixings for Linear motors.

Please not, The Linear range of automation require physical ground stop in order for the system to function.

The Linear range is compatible with any accessory found on the Gates Gates website including all Entry Phones, Video Entry Phones, Keypads,GSM openers, Push Buttons, Locks, and Safety devices.